M7 bayonet
The M7 bayonet (NSN 1095-00-017-9701) is a bayonet that was used by the U.S. military for the M16 rifle, it can also be used with the M4 carbine as well as many other assault rifles, carbines, and combat shotguns. It can be used as a fighting knife and utility tool. It was introduced in 1964, when the M16 rifle entered service during the Vietnam War.
M7 bayonet
AfterMidnightRider · Public domain
- Name
- M7 Bayonet
- Field
- bayonet
- Region
- United States
VALÉORINE Encyclopedia
VALÉORINE documentary reading
Documentary summary
The M7 bayonet (NSN 1095-00-017-9701) is a bayonet that was used by the U.S. military for the M16 rifle, it can also be used with the M4 carbine as well as many other assault rifles, carbines, and combat shotguns. It can be used as a fighting knife and utility tool. It was introduced in 1964, when the M16 rifle entered service during the Vietnam War.
Admitted source layer · organised and presented by VALÉORINE
Note VALÉORINE
No house-authored Note is published until its assertions and sources pass the VALÉORINE evidence contract. The documentary article remains available in full while that enrichment is being consolidated.
Documentary enrichment in progress · no unsupported statement published
Reference Check
Propose documentary evidence for M7 bayonet. A contribution is never written directly as fact: identity, source, rights and evidence gates still decide.
Sign in to contribute
World of VALÉORINE
Documentary connections
Only confirmed graph relationships appear here. Images are shown only when their identity and reuse rights both pass the documentary gate.
Documentary evidence
Evidence Panel
not yet certified
- Identity
- resolved
- Independent source families
- 0
- Admitted assertions
- 0
- Open conflicts
- 0
Authority files
wikidata · Q812576 · wikipedia · M7 bayonet
In this article
Key facts
Key facts
• Name — M7 Bayonet • Origin — United States • Type — Bayonet • Is Bladed — yes • Service — 1964–present • Used By — US Military • Wars — *Vietnam War • Operation Urgent Fury • Gulf War • War in Afghanistan • Iraq War • Design Date — 1944 for M4 bayonet • Manufacturer — *Bauer Ord Company • Colt (manufacturer of the M16) • Ontario Knife Company • Carl Eickhorn [for Colt] • Columbus Milpar & Mfg. (MIL-PAR) • Conetta Mfg. • Eight Dollar Mountain Foundry (EDMF) • Frazier Mfg. • General Cutlery (GEN CUT) • Imperial Knife. • Production Date — 1964–present • Number — ~3 million • Length — 11.75 in • Part Length — 6.75 in • Blade Type — Spear Point • Sheath Type — M8, M8A1, & M10
M8 Scabbard
M8 Scabbard
There are two variations of this scabbard, both with an olive drab fiberglass body with steel throat. The early version M8 scabbard only had a belt loop and lacked the double hook that earlier bayonet scabbards had for attaching to load carrying equipment such as the M1910 Haversack.
M8A1 Scabbard
M8A1 Scabbard
The improved M8A1 scabbard manufactured later in WWII has the M1910 bent wire hook. The scabbard throat flange is stamped "US M8" or "US M8A1" on the flat steel part along with manufacturer initials. Some M8 scabbards were later modified by adding the M1910 hook. Later M8A1 scabbards were manufactured with a modified extended tab on the web hanger to provide more clearance for the M5 bayonet which rubbed against the wider bayonet handle. This sheath is correct for all post-war US bayonets including the M4, M5, M6, and M7. It was also used with the M3 fighting knife.
Exploded view
Exploded view
• Bayonet-Knife M7 — Item number • Screw, Machine, Grip — 1 • Washer, Lock — 2 • Grip, Bayonet-Knife, LH — 3 • Grip, Bayonet-Knife, RH — 4 • Blade Assembly M7 — 5 • Pin, Spring — 6 • Lever, Lock-Release, LH — 7 • Lever, Lock-Release, RH — 8 • Spring, Helical, Compression — 9
Adoption
Adoption
While the United States Army officially replaced the M7 with the M9 bayonet beginning in 1985, and the United States Marine Corps replaced it with the OKC-3S bayonet beginning in 2003, on-hand stocks may continue in service for many years.
Places
Named by the record
Places
Only places the record itself states, plotted where the house gazetteer settles their coordinates. Nothing is inferred from a name or a nationality.
- United States
Named but not plotted · 1
M7 bayonet is associated with United States.
Country
Description
• Illustration — 20” AR-15-style rifle with M7 bayonet affixed • Illustration — M7 Bayonet mounted on a Mossberg 590A1 shotgun The M7 bayonet is very similar to the older M4 bayonet with the Korean War era plastic grips for the M1/M2 carbines except that the M7 has a much larger muzzle ring. The M7 has the same two-lever locking mechanism as the M4, that connects to a lug on the M16 rifle's barrel. The M4 (M1/M2 carbine), M5 (M1 rifle), and M6 bayonet (M14 rifle), are all derived from the World War II M3 fighting knife. The M7 differs from M6 bayonet for the M14 rifle. Most notably, the diameter of the muzzle rings, and the locking mechanism. The M7's release mechanism is on the pommel, while the M6 has a spring-loaded lever near the guard that when depressed releases the bayonet. Both models are approximately the same length, have the same black finish, and use the M8A1 (NSN 1095-508-0339), or later M10 (NSN 1095-00-223-7164) sheath. The M7's 1095 carbon steel blade is 6.75 in long, with an overall length of 11.75 in. Blade width is 0.1875 in and it weighs about 9.6 oz. One edge is sharpened its full length while the opposite side of the blade has approximately 3 in sharpened. There are no markings on the blade itself. The manufacturer's initials or name, along with "US M7", will be found stamped under the crossguard (see photo, right). The non-slip grips are molded black plastic. The steel parts have a uniform dark grey/black parkerized finish. The M7 bayonet NSN is NSN 1095-00-017-9701. The initial contractor was Bauer Ord Company. Colt (manufacturer of the M16) and Ontario Knife Company made many of the M7 bayonets for the military and continue to make and sell them commercially. Other manufacturers included Carl Eickhorn [for Colt], Columbus Milpar & Mfg. (MIL-PAR), Conetta Mfg., Frazier Mfg., General Cutlery (GEN CUT), Ontario Knife Company, and Imperial Knife. The M7 was also manufactured in Canada, West Germany, the Philippines, Singapore, Israel, South Korea, and Australia.
Primary material
Documents and archives
institutional register
- Internet Archive holdings naming M7 bayonet
Unverified · Internet Archive
- Wikidata, structured authority record Q812576: M7 bayonet
Unverified · Wikimedia Foundation
reference work
- “M7 bayonet”, English Wikipedia, consulted as further reading
Reputable secondary · Wikipedia
References
Citations
References
Each reference names the institution holding it, so a reader may go to the document itself.
institutional register
Internet Archive holdings naming M7 bayonetInternet Archive
Partially resolvedreference work
Partially resolvedinstitutional register
Wikidata, structured authority record Q812576: M7 bayonetWikimedia Foundation
Unverified
Connections
Knowledge graph
Connections
Each connection was recorded deliberately, with the basis for it kept on the internal record.
Broader subject
1- bayonetTerminology
Established from a fact already recorded on a verified source.
The Encyclopedia exists whether or not anything is for sale. Corrections are recorded rather than overwritten, and every version of this record is kept. Published 14 August 2026.
Elsewhere in Militaria
6,095 published records in this field, each with its sources named.
- M61 VulcanTerminology
- M621 cannonTerminology
- M67 grenadeTerminology
- M6C-210Terminology
- M7 PriestTerminology
- M7 RifleTerminology
- M712 CopperheadTerminology
- M72 LAWTerminology
Best supported in this field
For owners
Own an object connected with M7 bayonet?
A specialist will read what you send and tell you what the house can establish, what it cannot, and whether the object is suited to sale. There is no charge and no obligation. The object stays with you throughout; nothing is shipped to us unless it is arranged in writing beforehand.