Whitehurst & Son sundial

• Name — Whitehurst & Son sundial • Material — bronze • Created — 1812 • Location — Derby Museum, England

The Whitehurst family was known in Derby as eminent mechanics. John Whitehurst (1713–1788) was born in Congleton, but came to Derby where he entered business as a watch and clock maker. He moved to London when appointed to the post of Inspector of Weights. His nephew continued the business under the name of Whitehurst & Son. The family business was known for their turret clocks.

Sundial construction is based on understanding the geometry of the Solar System, and particularly how the Sun will cast a shadow onto a flat surface, in this case a horizontal surface. Each day over a yearly cycle the shadow will be different from the day before, and the shadow is specific to the location of the dial, particularly its latitude. The dial is designed to tell local apparent time so the longitude is not significant. By this we mean that noon will be at the point when the Sun is highest in sky and due south, standard time would be when the Sun was due south at another point such as the Royal Observatory at Greenwich. Derby is at 1° 28′ 46.2″ West of Greenwich, so the Sun reaches noon approximately 5 52.05 later. The other point to consider when telling the time is that as the Earth moves around the Sun in a slight ellipse, day length varies slightly giving a cumulative difference from the average, of up to 16 minutes in November and February, this, with another correction, is known as the equation of time and was really irrelevant until people started comparing sundials with mechanical clocks, which must either ignore the consequences or be re balanced each day to make them correspond with the natural cycle. They measure average time or local mean time. Railways timetabling demanded a fixed noon and fixed day leading to the adoption of Greenwich Mean Time. The local Midland Railway had adopted Greenwich Mean Time by January 1848. This particular bronze sundial is marked "Whitehurst and Son / Derby / 1812" and is thought to have been made for George Benson Strutt (who was the younger brother of the cotton spinner William Strutt), for his home at Bridge Hill House, in Belper. This has the precise location of 53° 1′ 49.08″ north, and 1° 29′ 26.88″ west of Greenwich, which is slightly different from those of Derby, at 52° 55′ 00″ north, a difference of 6′ 49″. The Longitudes are almost identical, with only a 2 second time difference.

This dial is stoutly made, with a thick gnomon, one edge of gnomon is the style which throws the shadow before noon, and the other edge is the style which throws the shadow after noon. The dial plate is not made up of one complete circle, but two semicircles separated by the thickness of the style. In this design of sundial, the angle of the style to the dial plate is exactly the same as latitude, which is 53° 1′ 49″ the latitude of the Bridge Hill House. The dial plate will be perfectly horizontal, slight adjustments for latitude can be made were the dial moved by shimmying up the dial plate by the change in degree, from the horizontal. As the dial is now 0° 6′ 49″, or about one-tenth of a degree south - the nose of the gnomon needs to be raised by that amount.

For each of the hours 1 to 6, the formula is calculated. For instance, for Belper, England, at 3 hours after noon, we substitute the numbers 53°.03 (Belper's latitude) and 3 into the formula which generates these results: A dial for Belper 53°.03 • One hour — 12°.08 • Two hours — 24°.76 • Three hours — 38°.62 • Four hours — 54°.15 • Five hours — 71°.46 • Six hours — 90°.00 The hours before noon are exactly the same, the dial is symmetrical, the other lines are mirror images of those above: 2 way symmetry. In the same manner, the half hours and the minute lines would be calculated. As noon lies exactly on the north–south line, and not 5′ 54″ to one side we can tell that this dial is telling Belper time and not Greenwich time.

• Illustration — The equation of time conversion scales • Illustration — Equation of time Significantly, on the plate we can see a pair of scales that help the observer make the equation of time correction: One scale gives the date in months and days while alongside of it another engraved with the minutes on that day that the watch would be running faster or slower. Here it is labeled "Watch Slower, Watch Faster. The 15th April is one day when no conversion needs to be made." This dial can be used both to read solar time shown by sundials and also the mean time that is displayed by clocks, with the practical purpose that observers can use the dial to calibrate their pocket watches. Watches would not always run true when the sundial was made in 1812; by 1820 watch manufacture had improved: The lever escapement was universally adopted and frequent calibration was no longer needed.

Another Whitehurst sundial dated around 1800 sold for £1850 in 2005 in Derby.