.22 Long

In 1887, the.22 long case was combined with the heavier 40 gr (2.6 g) bullet of the.22 extra long of 1880 to produce the.22 long rifle, giving a longer overall length and a higher muzzle energy. Many firearms designed for the.22 long rifle will chamber and fire the shorter round, though the.22 long generally does not generate sufficient energy to operate semi-automatic guns. The one prominent survivor of the.22 long is the.22 CB long, a long-cased version of the.22 CB. The original.22 long loading used the same powder charge as the.22 long rifle,.22 long bullet was significantly lighter, but it did not result in higher velocities for the.22 long when fired from a rifle. The large barrel volume to chamber volume ratio of a.22 rimfire rifle means that the powder gasses have expanded as far as they can before the bullet reaches the muzzle of a normal-length rifle barrel, and the light.22 long bullet has less inertia than the.22 long rifle. The quieter report and lower penetration of the.22 long cartridge were often seen as desirable qualities. The.22 long rifle performs as well in a short handgun barrel as the.22 long, and outperforms it in a long rifle barrel. Modern Hypervelocity loadings of the.22 long rifle use bullets as light as 30 gr (1.9 g), and modern blends of powder to generate velocities higher than normal loads, and chamber pressures high enough to cycle semi-automatic firearms reliably. The most well known of these is the CCI Stinger, which goes so far as to stretch the case length slightly. The overall length is still within the max overall length for the.22 long rifle. The.22 long is still produced even after the change over to smokeless powders. CCI currently loads a high-velocity.22 long with a muzzle velocity of 1,215 ft/s (370 m/s) and a muzzle energy of 95 ft⋅lbf (129 J)

Length: Case: 0.613 in (15.6 mm) Overall: 0.888 in (22.6 mm) Bullet weight: 29 gr (1.88 g) Twist: 1 in 20 for dedicated firearms