Solid Concepts 1911 DMLS

The first gun, version 1.0, is made up of 34 3D-printed 17-4 stainless steel components.

• Name — Solid Concepts 1911 DMLS • Origin — United States • Type — Semi-automatic pistol • Is Ranged — yes • Designer — John Browning • Design Date — 1911 (original design) / 2013 (3D printed version) • Manufacturer — Solid Concepts • Production Date — 2013 • Cartridge —.45 ACP • Feed — 7-round standard detachable box magazine • Action — Short recoil operation

• Illustration — Looking from the “Chamber end” of the Solid Concepts 3D printed barrel • Illustration — The ability to place text inside the barrel is possible with 3D printing The 1911 DMLS weighs 2.25 lbs when it is empty i.e is not filled with a magazine and the trigger pull weighs 5 lbf. The width is 1.3 in wide. The sight radius is 6.4 in and consists of a standard GI with a square notch rear. The ratio of the twist is 1:15.8; at 6=Lands 6=Grooves. The gun used Inconel 625 (a nickel-chromium alloy) material and stainless steel via the Direct Metal Laser Sintering method. The Solid Concepts Browning M1911 replica, version 2.0, will be composed of 34 Inconel 625 components, (not including grips). The two carbon-fiber filled nylon 12 grips were also 3D printed. Unlike early 3D printed plastic guns, the barrel of the 1911 was rifled. None of the parts were machined during production, and assembly took less than seven minutes once the parts had been filed and hardened.

The German EOSINT M270 Direct Metal 3D Printer used to create the weapon cost between $500,000 to $1,000,000 at the time the gun was created as of November 2013 and uses a commercial-grade power source. The printer requires argon and nitrogen gas.

According to Sky News, during the initial test Solid Concepts stated: "It functions beautifully. Our resident gun expert has fired 50 successful rounds and hit a few bull's eyes at over 30 yards (27.43 metres)". The Solid Concepts Pistol fired its 5000th round on 6 September 2014.