pottery of ancient Greece

• Illustration — Diagram of the parts of a typical Athenian vase, in this case a volute krater The names we use for Greek vase shapes are often a matter of convention rather than historical fact. A few do illustrate their own use or are labeled with their original names, while others are the result of early archaeologists' attempt to reconcile the physical object with a known name from Greek literature—not always successfully. To understand the relationship between form and function, Greek pottery may be divided into four broad categories, given here with common types: • storage and transport vessels, including the amphora, pithos, pelike, hydria, pyxis, • mixing vessels, mainly for symposia or male drinking parties, including the krater, and dinos, • jugs and cups, several types of kylix also just called cups, kantharos, phiale, skyphos, oinochoe and loutrophoros, • vases for oils, perfumes and cosmetics, including the large lekythos, and the small aryballos and alabastron. As well as these utilitarian functions, certain vase shapes were especially associated with rituals, others with athletics and the gymnasium. Not all of their uses are known, but where there is uncertainty scholars make good proximate guesses of what use a piece would have served. Some have a purely ritual function, for example Some vessels were designed as grave markers. Kraters marked the places of males and amphorae marked those of females. This helped them to survive, and is why some will depict funeral processions. White ground lekythoi contained the oil used as funerary offerings and appear to have been made solely with that object in mind. Many examples have a concealed second cup inside them to give the impression of being full of oil, as such they would have served no other useful gain. There was an international market for Greek pottery since the 8th century BC, which Athens and Corinth dominated down to the end of the 4th century BC. An idea of the extent of this trade can be gleaned from plotting the find maps of these vases outside of Greece, though this could not account for gifts or immigration. Only the existence of a second hand market could account for the number of panathenaics found in Etruscan tombs. South Italian wares came to dominate the export trade in the Western Mediterranean as Athens declined in political importance during the Hellenistic period. Archaeologists also note Greek pottery was used not just for daily tasks or just as art to be admired, but also to express social values, religious beliefs, and community identity. In many cases, these pieces of art acted as something that communicated cultural norms to people who encountered them in their everyday lives. Changes in ceramic styles often reflected bigger changes in the Greek world, like new trade routes or changes in city politics. Images on vases showing sports, festivals, and other common activities give us a glimpse into daily life and show how gender roles and proper behavior were shaped and reinforced. According to McNiven, Athenian painters used certain gestures, poses, and body positions to show whether someone was a citizen or an outsider, making pottery a key way to show social boundaries and identity in ancient Greece. Differences in pottery styles from places like Attica, Corinth, and East Greece also show how pottery helped express local community identity.

The few ways that clay pottery can be damaged is by being broken, being abraded or by coming in contact with fire. The process of making a pot and firing it is fairly simple. The first thing a potter needs is clay. Attica's high-iron clay gave its pots an orange color.

When clay is first dug out of the ground it is full of rocks and shells and other useless items that need to be removed. To do this the potter mixes the clay with water and lets all the impurities sink to the bottom. This is called levigation or elutriation. This process can be done many times. The more times this is done, the smoother clay becomes. • Illustration — Pottery being made on a wheel, by Dolon Prova

The clay is then kneaded by the potter and placed on a wheel. Once the clay is on the wheel the potter can shape it into any of the many shapes shown below, or anything else he desires. Wheel-made pottery dates back to roughly 2500 BC. Before this, the coil method of building the walls of the pot was employed. Most Greek vases were wheel-made, though as with the Rhyton mould-made pieces (so-called "plastic" pieces) are also found and decorative elements either hand-formed or by mould were added to thrown pots. More complex pieces were made in parts then assembled when it was leather hard by means of joining with a slip, where the potter returned to the wheel for the final shaping or turning. Sometimes, a young man helped turn the wheel.

After the pot was made, the potter painted it with an ultra fine grained clay slip; the paint was applied on the areas intended to become black after firing, according to the two different styles, i.e. the black figure and the red figure. For the decoration the vase painters used brushes of different thickness, pinpoint tools for incisions and probably single-hair tools for the relief lines. • Illustration — Black Figure style: incision of the paint slip layer before firing with a pin tool A series of analytical studies have shown that the striking black gloss with a metallic sheen, so characteristic of Greek pottery, emerged from the colloidal fraction of an illitic clay with very low calcium oxide content. This clay slip was rich in iron oxides and hydroxides, differentiating from that used for the body of the vase in terms of the calcium content, the exact mineral composition and the particle size. The fine clay suspension used for the paint was either produced by using several deflocculating additives to clay (potash, urea, dregs of wine, bone ashes, seaweed ashes, etc.) or by collecting it in situ from illitic clay beds following rain periods. Recent studies have shown that some trace elements in the black glaze (i.e. Zn in particular) can be characteristic of the clay beds used in antiquity. In general, different teams of scholars suggest different approaches concerning the production of the clay slip used in antiquity.

• Illustration — A potter's workshop. Side B from a Corinthian black-figure pinax, c. 575–550. Greek pottery, unlike today's pottery, was only fired once, using a very sophisticated process. The black color effect was achieved by means of changing the amount of oxygen present during firing. This was done in a process known as three-phase firing involving alternating oxidizing –reducing conditions. First, the kiln was heated to around 920–950 °C, with all vents open bringing oxygen into the firing chamber and turning both pot and slip a reddish-brown (oxidising conditions) due to the formation of hematite (Fe 2 O 3) in both the paint and the clay body. Then the vent was closed and green wood introduced, creating carbon monoxide which turns the red hematite to black magnetite (Fe 3 O 4); at this stage the temperature decreases due to incomplete combustion. In a final reoxidizing phase (at about 800–850 °C) the kiln was opened and oxygen reintroduced causing the unslipped reserved clay to go back to orange-red while the slipped area on the vase that had been sintered/vitrified in the previous phase, could no longer be oxidized and remained black. While the description of a single firing with three stages may seem economical and efficient, some scholars claim that it is equally possible that each of these stages was confined to separate firings in which the pottery is subjected to multiple firings, of different atmosphere. In any case, the faithful reproduction of the process involving extensive experimental work that led to the creation of a modern production unit in Athens since 2000, has shown that the ancient vases may have been subjected to multiple three-stage firings following repainting or as an attempt to correct color failures The technique which is mostly known as the "iron reduction technique" was decoded with the contribution of scholars, ceramists and scientists from the mid 18th century onwards to the end of the 20th century, i.e. Comte de Caylus (1752), Durand-Greville (1891), Binns and Fraser (1925), Schumann (1942), Winter (1959), Bimson (1956), Noble (1960, 1965), Hofmann (1962), Oberlies (1968), Pavicevic (1974), Aloupi (1993). More recent studies by Walton et al. (2009), Walton et al. (2014), Lühl et al. (2014) and Chaviara & Aloupi-Siotis (2016) by using advanced analytical techniques provide detailed information on the process and the raw materials used.

The most familiar aspect of ancient Greek pottery is painted vessels of fine quality. These were not the everyday pottery used by most people but were sufficiently cheap to be accessible to a wide range of the population. Due to the rarity of other forms of ancient Greek paintings, vase paintings stands as, alongside literature, some of the few glimpses of ancient Greek life available today.

• Illustration — Greek Prehistory Gallery, National Museum of Archaeology, Athens, Greece • Illustration — Bowl, Greek Prehistory Gallery, National Museum of Archaeology, Athens, Greece

Greek pottery goes back to the Stone Age, such as those found in Sesklo and Dimini.

More elaborate painting on Greek pottery goes back to the Minoan pottery and Mycenaean pottery of the Bronze Age, some later examples of which show the ambitious figurative painting that was to become highly developed and typical.

After many centuries dominated by styles of geometric decoration, becoming increasingly complex, figurative elements returned in force in the 8th century. From the late 7th century to about 300 BC evolving styles of figure-led painting were at their peak of production and quality and were widely exported. During the Greek Dark Age, spanning the 11th to 8th centuries BC, the prevalent early style was that of the protogeometric art, predominantly using circular and wavy decorative patterns. This was succeeded in mainland Greece, the Aegean, Anatolia, and Italy by the style of pottery known as geometric art, which employed neat rows of geometric shapes. The period of Archaic Greece, beginning in the 8th century BC and lasting until the early 5th century BC, saw the birth of the Orientalizing period, led largely by ancient Corinth, where the previous stick-figures of the geometric pottery become fleshed out amid motifs that replaced the geometric patterns. The classical ceramic decor is dominated mostly by Attic vase painting. Attic production was the first to resume after the Greek Dark Age and influenced the rest of Greece, especially Boeotia, Corinth, the Cyclades (in particular Naxos) and the Ionian colonies in the east Aegean. Production of vases was largely the prerogative of Athens – it is well attested that in Corinth, Boeotia, Argos, Crete and Cyclades, the painters and potters were satisfied to follow the Attic style. By the end of the Archaic period the styles of black-figure pottery, red-figure pottery and the white ground technique had become fully established and would continue in use during the era of Classical Greece, from the early 5th to late 4th centuries BC. Corinth was eclipsed by Athenian trends since Athens was the progenitor of both the red-figure and white ground styles.

• Illustration — Protogeometric amphora, BM Vases of the protogeometrical period (c. 1050–900 BC) represent the return of craft production after the collapse of the Mycenaean Palace culture and the ensuing Greek Dark Ages. It is one of the few modes of artistic expression besides jewelry in this period since the sculpture, monumental architecture and mural painting of this era are unknown to us. By 1050 BC life in the Greek peninsula seems to have become sufficiently settled to allow a marked improvement in the production of earthenware. The style is confined to the rendering of circles, triangles, wavy lines and arcs, but placed with evident consideration and notable dexterity, probably aided by compasses and multiple brushes. The site of Lefkandi is one of our most important sources of ceramics from this period where a cache of grave goods has been found giving evidence of a distinctive Euboian protogeometric style which lasted into the early 8th century.

• Illustration — Boeotian Geometric Hydria lamp, Louvre Geometric art flourished in the 9th and 8th centuries BC. It was characterized by new motifs, breaking with the representation of the Minoan and Mycenaean periods: meanders, triangles and other geometrical decoration (hence the name of the style) as distinct from the predominantly circular figures of the previous style. However, our chronology for this new art form comes from exported wares found in datable contexts overseas. • Illustration — The Dipylon Amphora, mid-8th century BC, with human figures for scale. The vase was used as a grave marker. National Archaeological Museum, Athens. With the early geometrical style (approximately 900–850 BC) one finds only abstract motifs, in what is called the "Black Dipylon" style, which is characterized by extensive use of black varnish, with the Middle Geometrical (approx. 850–770 BC), figurative decoration makes its appearance: they are initially identical bands of animals such as horses, stags, goats, geese, etc. which alternate with the geometrical bands. In parallel, the decoration becomes complicated and becomes increasingly ornate; the painter feels reluctant to leave empty spaces and fills them with meanders or swastikas. This phase is named horror vacui (fear of the empty) and will not cease until the end of geometrical period. In the middle of the century there begin to appear human figures, the best known representations of which are those of the vases found in Dipylon, one of the cemeteries of Athens. The fragments of these large funerary vases show mainly processions of chariots or warriors or of the funerary scenes: πρόθεσις (prothesis; exposure and lamentation of dead) or ἐκφορά (ekphora; transport of the coffin to the cemetery). The bodies are represented in a geometrical way except for the calves, which are rather protuberant. In the case of soldiers, a shield in form of a diabolo, called "dipylon shield" because of its characteristic drawing, covers the central part of the body. The legs and the necks of the horses, the wheels of the chariots are represented one beside the other without perspective. The hand of this painter, so called in the absence of signature, is the Dipylon Master, could be identified on several pieces, in particular monumental amphorae. At the end of the period there appear representations of mythology, probably at the moment when Homer codifies the traditions of Trojan cycle in the Iliad and the Odyssey. Here however the interpretation constitutes a risk for the modern observer: a confrontation between two warriors can be a Homeric duel or simple combat; a failed boat can represent the shipwreck of Odysseus or any hapless sailor. Lastly, are the local schools that appear in Greece. Production of vases was largely the prerogative of Athens – it is well attested that as in the proto-geometrical period, in Corinth, Boeotia, Argos, Crete and Cyclades, the painters and potters were satisfied to follow the Attic style. From about the 8th century BC on, they created their own styles, Argos specializing in the figurative scenes, Crete remaining attached to a more strict abstraction.

• Illustration — Proto-Corinthian skyphos, c. 625 BC, Louvre The orientalizing style was the product of cultural ferment in the Aegean and Eastern Mediterranean of the 8th and 7th centuries BC. Fostered by trade links with the city-states of Asia Minor, the artifacts of the East influenced a highly stylized yet recognizable representational art. Ivories, pottery and metalwork from the Neo-Hittite principalities of northern Syria and Phoenicia found their way to Greece, as did goods from Anatolian Urartu and Phrygia, yet there was little contact with the cultural centers of Egypt or Assyria. The new idiom developed initially in Corinth (as Proto-Corinthian) and later in Athens between 725 BC and 625 BC (as Proto-Attic). • Illustration — Proto-Corinthian olpe with registers of lions, bulls, ibex and sphinxes, c. 640–630 BC, Louvre It was characterized by an expanded vocabulary of motifs: sphinx, griffin, lions, etc., as well as a repertory of non-mythological animals arranged in friezes across the belly of the vase. In these friezes, painters also began to apply lotuses or palmettes. Depictions of humans were relatively rare. Those that have been found are figures in silhouette with some incised detail, perhaps the origin of the incised silhouette figures of the black-figure period. There is sufficient detail on these figures to allow scholars to discern a number of different artists' hands. Geometrical features remained in the style called proto-Corinthian that embraced these Orientalizing experiments, yet which coexisted with a conservative sub-geometric style. The ceramics of Corinth were exported all over Greece, and their technique arrived in Athens, prompting the development of a less markedly Eastern idiom there. During this time described as Proto-Attic, the orientalizing motifs appear but the features remain not very realistic. The painters show a preference for the typical scenes of the Geometrical Period, like processions of chariots. However, they adopt the principle of line drawing to replace the silhouette. In the middle of the 7th century BC, there appears the black and white style: black figures on a white zone, accompanied by polychromy to render the color of the flesh or clothing. Clay used in Athens was much more orange than that of Corinth, and so did not lend itself as easily to the representation of flesh. Attic Orientalising Painters include the Analatos Painter, the Mesogeia Painter and the Polyphemos Painter. Crete, and especially the islands of the Cyclades, are characterized by their attraction to the vases known as "plastic", i.e. those whose paunch or collar is moulded in the shape of head of an animal or a man. At Aegina, the most popular form of the plastic vase is the head of the griffin. The Melanesian amphoras, manufactured at Paros, exhibit little knowledge of Corinthian developments. They present a marked taste for the epic composition and a horror vacui, which is expressed in an abundance of swastikas and meanders. Finally one can identify the last major style of the period, that of Wild Goat Style, allotted traditionally to Rhodes because of an important discovery within the necropolis of Kameiros. In fact, it is widespread over all of Asia Minor, with centers of production at Miletus and Chios. Two forms prevail oenochoes, which copied bronze models, and dishes, with or without feet. The decoration is organized in superimposed registers in which stylized animals, in particular of feral goats (from whence the name) pursue each other in friezes. Many decorative motifs (floral triangles, swastikas, etc.) fill the empty spaces.

Relief and plastic vases became particularly popular in the 4th century BC and continued being manufactured in the Hellenistic period. They were inspired by the so-called "rich style" developed mainly in Attica after 420 BC. The main features were the multi-figured compositions with use of added colours (pink/reddish, blue, green, gold) and an emphasis on female mythological figures. Theatre and performing constituted yet one more source of inspiration. Delphi Archaeological Museum has some particularly good examples of this style, including a vase with Aphrodite and Eros. The base is round, cylindrical, and its handle vertical, with bands, covered with black colour. The female figure (Aphrodite) is depicted seated, wearing an himation. Next to her stands a male figure, naked and winged. Both figures wear wreaths made of leaves and their hair preserve traces of golden paint. The features of their faces are stylized. The vase has a white ground and maintains in several parts the traces of bluish, greenish and reddish paint. It dates to the 4th century BC. In the same room is kept a small lekythos with a plastic decoration, depicting a winged dancer. The figure wears a Persian head cover and an oriental dress, indicating that already in that period oriental dancers, possibly slaves, had become quite fashionable. The figure is also covered with a white colour. The total height of the vase is 18 centimeters and it dates to the 4th century BC.

• Illustration — A West Slope Ware kantharos, 330–300 BC, Kerameikos Archaeological Museum, Athens The Hellenistic period, ushered in by the conquests of Alexander the Great, saw the virtual disappearance of black and red-figure pottery yet also the emergence of new styles such as West Slope Ware in the east, the Centuripe ware in Sicily, and the Gnathia vases to the west. Outside of mainland Greece other regional Greek traditions developed, such as those in Magna Graecia with the various styles in South Italy, including Apulian, Lucanian, Paestan, Campanian, and Sicilian.

• Illustration — The so-called "Memnon pieta", Ancient Greek Attic red-figure cup, c. 490–480 BC, from Capua. Inscriptions on the left: (ΕΕΝΕΜΕΚΝΕRINE (meaning unclear), HERMOΓΕΝΕS KALOS ("Hermogenes kalos" – "Hermogenes is beautiful"). Inscriptions on the right: HEOS ("Eos"), ΔΟRIS EΓRAΦSEN ("Doris Egraphsen" – Do(u)ris painted it). Inscription on the right: MEMNON ("Memnon"), KALIAΔES EΠOIESEN ("Kaliades epoiesen" – Kaliades made it). Musée du Louvre, G 155. Inscriptions on Greek pottery are of two kinds; the incised (the earliest of which are contemporary with the beginnings of the Greek alphabet in the 8th century BC), and the painted, which only begin to appear a century later. Both forms are relatively common on painted vases until the Hellenistic period when the practice of inscribing pots seems to die out. They are by far most frequently found on Attic pottery. • Illustration — Signature (written retrograde) SOΦΙLOS MEΓΡΑΦSEN ("Sophilos megraphsen" – Sophilos drew me), c. 570 BC, British Museum, GR 1971.11–1.1 A number of sub-classes of inscription can be distinguished. Potters and painters occasionally signed their works with epoiesen and egraphsen respectively. Trademarks are found from the start of the 6th century on Corinthian pieces; these may have belonged to an exporting merchant rather than the pottery workfield and this remains a matter of conjecture. Patrons' names are also sometimes recorded, as are the names of characters and objects depicted. At times we may find a snatch of dialogue to accompany a scene, as in 'Dysniketos's horse has won', announces a herald on a Panathenaic amphora (BM, B 144). More puzzling, however, are the kalos and kalee inscriptions, which might have formed part of courtship ritual in Athenian high society, yet are found on a wide variety of vases not necessarily associated with a social setting. Finally there are abecedaria and nonsense inscriptions, though these are largely confined to black-figure pots.

Greek terracotta figurines were another important type of pottery, initially mostly religious, but increasingly representing purely decorative subjects. The so-called Tanagra figurines, in fact made elsewhere as well, are one of the most important types. Earlier figurines were usually votive offerings at temples.

Several clay vases owed their inspiration to metalwork forms in bronze, silver and sometimes gold. These were increasingly used by the elite when dining, but were not placed in graves, where they would have been robbed, and were often treated as a store of value to be traded as bullion when needed. Very few metal vessels have survived as at some point they were melted down and the metal reused. In recent decades many scholars have questioned the conventional relationship between the two materials, seeing much more production of painted vases than was formerly thought as made to be placed in graves, as a cheaper substitute for metalware in both Greece and Etruria. The painting itself may also copy that on metal vessels more closely than was thought. The Derveni Krater, from near Thessaloniki, is a large bronze volute krater from about 320 BC, weighing 40 kilograms, and finely decorated with a 32-centimetre-tall frieze of figures in relief representing Dionysus surrounded by Ariadne and her procession of satyrs and maenads. The alabastron's name derives from alabaster, from which it was originally made. Glass was also used, mostly for fancy small perfume bottles, though some Hellenistic glass rivalled metalwork in quality and probably price.

• Illustration — Achilles and Penthesileia by Exekias, c. 540 BC, BM. London. Black-figure is the most commonly imagined when one thinks about Greek pottery. It was a popular style in ancient Greece for many years. The black-figure period coincides approximately with the era designated by Winckelmann as the middle to late Archaic, from c. 620 to 480 BC. The technique of incising silhouetted figures with enlivening detail which we now call the black-figure method was a Corinthian invention of the 7th century and spread from there to other city states and regions including Sparta, Boeotia, Euboea, the east Greek islands and Athens. The Corinthian fabric, extensively studied by Humfry Payne and Darrell Amyx, can be traced though the parallel treatment of animal and human figures. The animal motifs have greater prominence on the vase and show the greatest experimentation in the early phase of Corinthian black-figure. As Corinthian artists gained confidence in their rendering of the human figure the animal frieze declined in size relative to the human scene during the middle to late phase. By the mid-6th century BC, the quality of Corinthian ware had fallen away significantly to the extent that some Corinthian potters would disguise their pots with a red slip in imitation of superior Athenian ware. At Athens researchers have found the earliest known examples of vase painters signing their work, the first being a dinos by Sophilos (illus. below, BM, c. 580), this perhaps indicative of their increasing ambition as artists in producing the monumental work demanded as grave markers, as for example with Kleitias's François Vase. Many scholars consider the finest work in the style to belong Exekias and the Amasis Painter, who are noted for their feeling for composition and narrative. Circa 520 BC the red-figure technique was developed and was gradually introduced in the form of the bilingual vase by the Andokides Painter, Oltos and Psiax. Red-figure quickly eclipsed black-figure, yet in the unique form of the Panathanaic Amphora, black-figure continued to be utilised well into the 4th century BC.

• Illustration — Reveller and courtesan by Euphronios, c. 500 BC, BM E 44 The innovation of the red-figure technique was an Athenian invention of the late 6th century. It was quite the opposite of black-figure which had a red background. The ability to render detail by direct painting rather than incision offered new expressive possibilities to artists such as three-quarter profiles, greater anatomical detail and the representation of perspective. The first generation of red-figure painters worked in both red- and black-figure as well as other methods including Six's technique and white-ground; the latter was developed at the same time as red-figure. However, within twenty years, experimentation had given way to specialization as seen in the vases of the Pioneer Group, whose figural work was exclusively in red-figure, though they retained the use of black-figure for some early floral ornamentation. The shared values and goals of The Pioneers such as Euphronios and Euthymides signal that they were something approaching a self-conscious movement, though they left behind no testament other than their own work. John Boardman said of the research on their work that "the reconstruction of their careers, common purpose, even rivalries, can be taken as an archaeological triumph". • Illustration — This rhyton—used for drinking wine—is shaped like a donkey's head on one side of its body and a ram's on the other. c. 450 BC. Walters Art Museum, Baltimore. The next generation of late Archaic vase painters (c. 500 to 480 BC) brought an increasing naturalism to the style as seen in the gradual change of the profile eye. This phase also sees the specialization of painters into pot and cup painters, with the Berlin and Kleophrades Painters notable in the former category and Douris and Onesimos in the latter. • Illustration — Neck amphora depicting an athlete running the hoplitodromos by the Berlin Painter, c. 480 BC, Louvre By the early to high classical era of red-figure painting (c. 480–425 BC), a number of distinct schools had evolved. The Mannerists associated with the workshop of Myson and exemplified by the Pan Painter hold to the archaic features of stiff drapery and awkward poses and combine that with exaggerated gestures. By contrast, the school of the Berlin Painter in the form of the Achilles Painter and his peers (who may have been the Berlin Painter's pupils) favoured a naturalistic pose usually of a single figure against a solid black background or of restrained white-ground lekythoi. Polygnotos and the Kleophon Painter can be included in the school of the Niobid Painter, as their work indicates something of the influence of the Parthenon sculptures both in theme (e.g., Polygnotos's centauromachy, Brussels, Musées Royaux A. & Hist., A 134) and in feeling for composition. Toward the end of the century, the "Rich" style of Attic sculpture as seen in the Nike Balustrade is reflected in contemporary vase painting with an ever-greater attention to incidental detail, such as hair and jewellery. The Meidias Painter is usually most closely identified with this style. Vase production in Athens stopped around 330–320 BC possibly due to Alexander the Great's control of the city, and had been in slow decline over the 4th century along with the political fortunes of Athens itself. However, vase production continued in the 4th and 3rd centuries in the Greek colonies of southern Italy where five regional styles may be distinguished. These are the Apulian, Lucanian, Sicilian, Campanian and Paestan. Red-figure work flourished there with the distinctive addition of polychromatic painting and in the case of the Black Sea colony of Panticapeum the gilded work of the Kerch Style. Several noteworthy artists' work comes down to us including the Darius Painter and the Underworld Painter, both active in the late 4th century, whose crowded polychromatic scenes often essay a complexity of emotion not attempted by earlier painters. Their work represents a late mannerist phase to the achievement of Greek vase painting.

• Illustration — Raging maenad by the Brygos Painter – she holds a thyrsos in her right hand, her left is swinging a leopard through the air, and a snake is winding through the diadem in her hair – tondo of a kylix, 490–480 BC, Munich, Staatliche Antikensammlungen The white-ground technique was developed at the end of the 6th century BC. Unlike the better-known black-figure and red-figure techniques, its coloration was not achieved through the application and firing of slips but through the use of paints and gilding on a surface of white clay. It allowed for a higher level of polychromy than the other techniques, although the vases end up less visually striking. The technique gained great importance during the 5th and 4th centuries, especially in the form of small lekythoi that became typical grave offerings. Important representatives include its inventor, the Achilles Painter, as well as Psiax, the Pistoxenos Painter, and the Thanatos Painter. • Illustration — Janus-faced Attic red-figure plastic kantharos with heads of a satyr and a woman, c. 420