Panzerjäger I

It was intended to counter heavy French tanks like the Char B1 bis that were beyond the capabilities of the 3.7 cm Pak 36 anti-tank gun and extended the life of the obsolete Panzer I chassis. A total of 202 Panzer I chassis were converted to Panzerjäger I standard in 1940–41, and were employed in the Battle of France, in the North Africa campaign and on the Eastern Front.

• Is Vehicle — yes • Name — Panzerjäger I • Origin — Nazi Germany • Type — Panzerjäger Self-propelled anti-tank gun • Is Artillery — yes • Service — 1940–1943 • Used By — Nazi Germany • Wars — World War II • Designer — Alkett • Design Date — 1939–1940 • Production Date — March 1940– February 1941 • Number — 202 • Length — ftin • Width — ftin • Crew — 3 • Armour — 6–14.5 mm • Primary Armament — Pak(t) • Elevation — −8° to +12° • Traverse — 35° • Engine — 3.8 L 6-cylinder, water-cooled Maybach NL38 TR • Transmission — 6 speed ZF F.G.31 • Fuel Capacity — USgal • Pw Ratio — / tonne • Suspension — leaf-spring • Clearance — ftin

The Panzer I turret was removed and a fixed gun shield added to protect the armament and crew. The anti-tank gun was mounted on a pedestal in the fighting compartment after wheels, axle and trails were removed, but retained its original gun shield. It normally carried 74 antitank and 10 HE shells. Alkett and contractors built 202 vehicles, the first series of 132 by Alkett in 1940. Ten of the second series of 70 were assembled by Alkett while the remainder were assembled by Klöckner-Humboldt-Deutz in 1940 and 1941. The first series had a five-sided shield.; vehicles in the second series are recognizable by their seven-sided gun shield. The formal name was 4.7 cm PaK(t) (Sf) auf Panzerkampfwagen I ohne Turm, translating as "4.7 cm antitank gun (Czech) (self-propelled) on armoured combat vehicle I without turret". Armor: thickness/slope from vertical • Front — Side — Rear — Top/bottom • Gun shield — at 27° — at 27° — none — none • Superstructure — at 22° — at 12° — at 0° • Hull — at 27° — at 0° — at 17°

Panzerjägers were organized into companies of nine vehicles, with three companies per battalion, although for the French Campaign, anti-tank battalion Panzerjäger-Abteilung 521 had just six vehicles in each company. For the remainder of the war, they were used solely by independent antitank battalions, with two exceptions post the Balkans campaign, one company was assigned to the SS-Brigade Leibstandarte der SS Adolf Hitler and another to PanzerjägerAbteilung 900 of Lehr-Brigade (mot.) 900 ("900th Motorized Training Brigade") in preparation for Operation Barbarossa.

Panzerjäger-Abteilung 521, 616, 643 and 670 had 99 vehicles in the Battle of France. Only Panzerjäger-Abteilung 521 participated in the campaign from the beginning; the other three were still training until a few days after the campaign began but were sent to the front as training finished. Twenty-seven Panzerjäger I equipped Panzerjäger-Abteilung 605 in North Africa. It arrived in Tripoli, Libya between 18 and 21 March 1941. Five replacements were sent in September 1941 but only three arrived on 2 October, the others being lost when the freighter Castellon was sunk by the submarine HMS Perseus. At the start of the British Operation Crusader the battalion was at full strength but lost thirteen vehicles during the battles. Four more replacements were sent in January 1942 so that it mustered seventeen at the beginning of the Battle of Gazala. Despite the shipment of another three vehicles from September–October 1942, the battalion only had eleven by the beginning of the Second Battle of El Alamein. The last two replacements were received by the battalion in November 1942. Abteilung 521, 529, 616, 643 and 670 were equipped with 135 Panzerjäger I for Operation Barbarossa. They were assigned as given below for the opening stages of the battle: • Abteilung — Corps — Army — Army Group • 521 — XXIV Corps — 2nd Panzer Group — Army Group Center • 529 — VII Corps — 4th Army — Army Group Center • 616 — 4th Panzer Group — Army Group North • 643 — XXXIX Corps (mot.) — 3rd Panzer Group — Army Group Center • 670 — 1st Panzer Group — Army Group South By 27 July 1941, Abteilung 529 had lost four Panzerjäger I vehicles. On 23 November 1941 it reported that it still had 16 vehicles, although two were not operational. On 5 May 1942, -Abteilung 521 reported that only five of those vehicles still existed. Abteilung 529 had only two on strength when it was disbanded on 30 June 1942. Abteilung 616 seems to have been an exception as it reported all three companies were equipped with the Panzerjäger I, during mid or late 1942.

• Illustration — Rear view of a Panzerjäger I from the second series. • Illustration — 1941 colour photograph of a Panzerjäger I in western Ukraine • Abteilung 643, 25 July 1940 • "The armor-piercing shells (Panzergranaten) were effective against 45 to thick armor at ranges up to 500 m – sufficient to 600 m. Observation was limited; the crew, with the exception of the driver, had to look over the gun shield to observe what is in front of the Panzerjäger I, resulting in the exposure of body parts to potential dangers; namely shots to the head (also known as Kopfschüsse in German). In effect, the crew behind the gun shield were blind in urban combat, suppressing fire and individual tanks". • Abteilung 521, July 1941 • "The effective range of the 4.7 cm Pak(t) is 1000 to with a maximum range of 1500 m. When attacking an enemy position equipped with anti-tank guns and artillery, namely near Mogilev and Rogachev, its rather tall superstructure presented a target for artillery and anti-tank guns. Thus, the Panzerjäger is destroyed before it can get into action. When large shells explode close-by, shrapnel pierced the thin armor. Russian anti-tank guns already penetrated at 1200 m range. The 1st Kompanie lost five out of the ten vehicles (Kampffahrzeuge) in such actions, of which only two could be repaired." • Abteilung 605, July 1942 • "The accuracy of this weapon was commented on; as it will usually hit its target with the first shot at ranges up to 1000 m. However, its penetration qualities were far too low for the necessary combat ranges in the desert of North Africa. The chassis, engine and suspension were constantly in need of care due to the additional weight of the anti-tank gun. In one case, three Mk II (Matilda II infantry tanks) were penetrated at a range of 400 m by 4.7 cm tungsten-core armor-piercing shell (Pz.Gr. 40). It usually penetrates 60 mm of armor. Therefore, a small percentage of these rounds are desired. The 4.7 cm armor-piercing shell (Pz.Gr. 36(t)) will not penetrate a Mk.II at 600 to. But the crew will abandon the tank because fragments spall off the armor on the inside."