neutron bomb

The concept was originally developed by the United States in the late 1950s and early 1960s. It was seen as a "cleaner" bomb for use against massed Soviet armored divisions. During the Cold War, China also developed a neutron bomb but refrained from deploying it on tactical delivery systems. ERWs were first operationally deployed for anti-ballistic missiles (ABMs). In this role, the burst of neutrons would cause nearby warheads to undergo partial fission, preventing them from exploding properly. For this to work, the ABM would have to explode within approximately 100 m of its target. The first example of such a system was the W66, used on the Sprint missile used in the US Nike-X system. It is believed the Soviet equivalent, the A-135's 53T6 missile, uses a similar design. The weapon was once again proposed for tactical use by the United States in the 1970s and 1980s, and production of the W70 began for the MGM-52 Lance in 1981. This time, it led to protests as the growing anti-nuclear movement gained strength through this period. Opposition was so intense that European leaders refused to accept it on their territory. US President Ronald Reagan ordered the production of the W70-3, which remained in the US stockpile until they were retired in 1992. The last W70 was dismantled in February 1996.

In a standard thermonuclear design, a small fission bomb is placed close to a larger mass of thermonuclear fuel, usually lithium deuteride. The two components are then placed within a thick radiation case, usually made from uranium, lead, or steel. The case traps the energy from the fission bomb for a brief period, allowing it to heat and compress the main thermonuclear fuel. The case is normally made of depleted uranium or natural uranium metal, because the thermonuclear reactions give off extraordinarily large numbers of high-energy neutrons that can cause fission reactions in the casing material. These can add considerable energy to the reaction; in a typical design, as much as 50% of the total energy comes from fission events in the casing. For this reason, these weapons are technically known as fission-fusion-fission weapons. In a neutron bomb, the casing material is selected either to be transparent to neutrons or to actively enhance their production. The burst of neutrons created in the thermonuclear reaction is then free to escape the bomb, outpacing the physical explosion. By carefully designing the thermonuclear stage of the weapon, the neutron burst can be maximized while minimizing the blast itself. This makes the lethal radius of the neutron burst greater than that of the explosion itself. Since the neutrons are absorbed or decay rapidly, such a burst over an enemy column would kill the crews, but enable a quick reoccupation of the area. Compared to a pure fission bomb with an identical explosive yield, a neutron bomb would emit about ten times the amount of neutron radiation. In a fission bomb, at sea level, the total radiation pulse energy which is composed of both gamma rays and neutrons is approximately 5% of the entire energy released; in neutron bombs, it would be closer to 40%. Furthermore, the neutrons emitted by a neutron bomb have a much higher average energy level (close to 14 MeV) than those released during a fission reaction (1–2 MeV). Technically speaking, every low-yield nuclear weapon is a radiation weapon, including non-enhanced variants. All nuclear weapons up to about 10 kilotons in yield have prompt neutron radiation as their furthest-reaching lethal component. For standard weapons above about 10 kilotons of yield, the lethal blast and thermal effects radius begins to exceed the lethal ionizing radiation radius. Enhanced radiation weapons also fall into this same yield range and simply enhance the intensity and range of the neutron dose for a given yield.

The conception of neutron bombs is generally credited to Samuel T. Cohen of the Lawrence Livermore National Laboratory, who developed the concept in 1958. Initial development was carried out as part of projects Dove and Starling, and an early device was tested underground in early 1962. Designs for a "weaponized" version were developed in 1963. Development of two production designs for the Army's MGM-52 Lance short-range missile began in July 1964, the W63 at Livermore and the W64 at Los Alamos. Both entered phase three testing in July 1964, and the W64 was cancelled in favor of the W63 in September 1964. The W63 was in turn cancelled in November 1965 in favor of the W70 (Mod 0), a conventional design. By this time, the same concepts were being used to develop warheads for the Sprint missile, an anti-ballistic missile (ABM), with Livermore designing the W65 and Los Alamos the W66. Both entered phase three testing in October 1965, but the W65 was cancelled in favor of the W66 in November 1968. Testing of the W66 was carried out in the late 1960s, and it entered production in June 1974, the first neutron bomb to do so. Approximately 120 were built, with about 70 of these being on active duty during 1975 and 1976 as part of the Safeguard Program. When that program was shut down they were placed in storage, and eventually decommissioned in the early 1980s. Development of ER warheads for Lance continued, but in the early 1970s, attention had turned to using modified versions of the W70, the W70 Mod 3. Development was subsequently postponed by President Jimmy Carter in 1978 following protests against his administration's plans to deploy neutron warheads to ground forces in Europe. On November 17, 1978, in a test, the USSR detonated its first similar-type bomb. President Ronald Reagan restarted production in 1981. The Soviet Union renewed a propaganda campaign against the US's neutron bomb in 1981 following Reagan's announcement. In 1983, Reagan then announced the Strategic Defense Initiative, which surpassed neutron bomb production in ambition and vision and with that, neutron bombs quickly faded from the center of the public's attention. Attempted warhead replacement programs • Initial — Enhanced — Gun caliber • W48 — W82 — 155 mm • W33 — W79 — 203mm Three types of enhanced radiation weapons (ERW) were deployed by the United States. The W66 warhead, for the anti-ICBM Sprint missile system, was deployed in 1975 and retired the next year, along with the missile system. The W70 Mod 3 warhead was developed for the short-range, tactical MGM-52 Lance missile, and the W79 Mod 0 was developed for nuclear artillery shells. The latter two types were retired by President George H. W. Bush in 1992, following the end of the Cold War. The last W70 Mod 3 warhead was dismantled in 1996, and the last W79 Mod 0 was dismantled by 2003, when the dismantling of all W79 variants was completed. According to the Cox Report, as of 1999, the United States had never deployed a neutron weapon. The nature of this statement is not clear; it reads, "The stolen information also includes classified design information for an enhanced radiation weapon (commonly known as the "neutron bomb"), which neither the United States, nor any other nation, has ever deployed." However, the fact that neutron bombs had been produced by the US was well known at this time and part of the public record. Cohen suggests the report is playing with the definitions; while the US bombs were never deployed to Europe, they remained stockpiled in the US. In addition to the two superpowers, France and China are known to have tested neutron or enhanced radiation bombs. France conducted an early test of the technology in 1967 and tested an actual neutron bomb in 1980. China conducted a successful test of neutron bomb principles in 1984 and a successful test of a neutron bomb in 1988. However, neither of those countries chose to deploy neutron bombs. Chinese nuclear scientists stated before the 1988 test that China had no need for neutron bombs, but it was developed to serve as a "technology reserve", in case the need arose in the future. In May 1998, Senior Pakistani Scientist, Dr. N. M. Butt, stated that "PAEC built a sufficient number of neutron bombs—a battlefield weapon that is essentially a low yield device". In August 1999, the Indian government stated that India was capable of producing a neutron bomb. Although no country is currently known to deploy them in an offensive manner, all thermonuclear dial-a-yield warheads that have about 10 kiloton and lower as one dial option, with a considerable fraction of that yield derived from fusion reactions, can be considered able to be neutron bombs in use, if not in name. The only country definitely known to deploy dedicated (that is, not dial-a-yield) neutron warheads for any length of time is the Soviet Union/Russia, which inherited the USSR's neutron warhead equipped ABM-3 Gazelle missile program. This ABM system contains at least 68 neutron warheads with a 10-kiloton yield each and it has been in service since 1995, with inert missile testing approximately every other year since then (2014). The system is designed to destroy incoming endoatmospheric nuclear warheads aimed at Moscow and other targets and is the lower-tier/last umbrella of the A-135 anti-ballistic missile system (NATO reporting name: ABM-3). By 1984, according to Mordechai Vanunu, Israel was mass-producing neutron bombs. Considerable controversy arose in the US and Western Europe following a June 1977 Washington Post exposé describing US government plans to equip US Armed Forces with neutron bombs. The article focused on the fact that it was the first weapon specifically intended to kill humans with radiation. Lawrence Livermore National Laboratory director Harold Brown and Soviet General Secretary Leonid Brezhnev both described neutron bombs as a "capitalist bomb", because it was designed to destroy people while preserving property.

• Illustration — The 1979 Soviet/Warsaw Pact invasion plan, "Seven Days to the River Rhine" to seize West Germany in the event of a nuclear attack on Poland by NATO forces. Soviet analysts had correctly assumed that the NATO response would be to use regular tactical nuclear weapons to stop such a massive Warsaw Pact invasion. According to proponents, neutron bombs would blunt an invasion by Soviet tanks and armored vehicles without causing as much damage or civilian deaths as the older nuclear weapons would. Neutron bombs would have been used if the REFORGER conventional response of NATO to the invasion was too slow or ineffective. Neutron bombs are purposely designed with explosive yields lower than other nuclear weapons. Since neutrons are scattered and absorbed by air, neutron radiation effects drop off rapidly with distance in air. As such, there is a sharper distinction, relative to thermal effects, between areas of high lethality and areas with minimal radiation doses. No high yield (more than c. 10 kiloton) nuclear bombs, including the extreme example of the 50 megaton Tsar Bomba, are able to radiate sufficient neutrons beyond their lethal blast range when detonated as a surface burst or low altitude air burst and so are not classified as neutron bombs, thus limiting the yield of neutron bombs to a maximum of about 10 kilotons. The intense pulse of high-energy neutrons generated by a neutron bomb is the principal killing mechanism, not the fallout, heat or blast. The inventor of the neutron bomb, Sam Cohen, criticized the description of the W70 as a neutron bomb since it could be configured to yield 100 kilotons: Although neutron bombs are commonly believed to "leave the infrastructure intact", with current designs that have explosive yields in the low kiloton range, detonation in (or above) a built-up area would still cause a sizable degree of building destruction, through blast and heat effects out to a moderate radius, albeit considerably less destruction, than when compared to a standard nuclear bomb of the exact same total energy release or "yield". • Illustration — U.S. Army M110 howitzers in a 1984 REFORGER staging area before transport. This dual capable system could fire nuclear artillery shells. The Warsaw Pact tank strength was over twice that of NATO, and Soviet deep battle doctrine was likely to be to use this numerical advantage to rapidly sweep across continental Europe if the Cold War ever turned hot. Any weapon that could break up their intended mass tank formation deployments and force them to deploy their tanks in a thinner, more easily dividable manner, would aid ground forces in the task of hunting down solitary tanks and using anti-tank missiles against them, such as the contemporary M47 Dragon and BGM-71 TOW missiles, of which NATO had hundreds of thousands. Rather than making extensive preparations for battlefield nuclear combat in Central Europe, the Soviet military leadership believed that conventional superiority provided the Warsaw Pact with the means to approximate the effects of nuclear weapons and achieve victory in Europe without resorting to those weapons. Neutron bombs, or more precisely, enhanced [neutron] radiation weapons were also to find use as strategic anti-ballistic missile weapons, and in this role, they are believed to remain in active service within Russia's Gazelle missile.

• Illustration — A wooden framed house photographed during a 1953 nuclear test, 5 psi overpressure, full collapse. Upon detonation, a near-ground airburst of a 1-kiloton neutron bomb would produce a large blast wave and a powerful pulse of both thermal radiation and ionizing radiation in the form of fast (14.1MeV) neutrons. The thermal pulse would cause third degree burns to unprotected skin out to approximately 500 meters. The blast would create overpressure of at least 4.6psi (32 kPa) out to a radius of 600 meters, which would severely damage all non-reinforced concrete structures. The detonation would deliver a rapidly incapacitating, lethal dose of radiation (80+ Gy) to tank crews up to 690 m away, and would destroy or render unusable most civilian buildings in that radius. Because liquid-filled objects like the human body are resistant to gross overpressure, the 4–5psi (28-34 kPa) blast overpressure would cause very few direct casualties at a range of c.600m. The powerful winds produced by this overpressure, however, could throw bodies into objects or throw debris at high velocity, including window glass, both with potentially lethal results. Casualties would be highly variable depending on surroundings, including potential building collapses. The pulse of neutron radiation would cause immediate and permanent incapacitation to unprotected outdoor humans in the open out to 900 meters, with death occurring in one or two days. The median lethal dose (LD 50) of 6 Gray would extend to between 1350 and 1400 meters for those unprotected and outdoors, where approximately half of those exposed would die of radiation sickness after several weeks. In a city, the pulse would also cause neutron activation of many building materials, such as galvanized steel, making them radioactive (see area denial use below). A human residing within, or simply shielded by, at least one concrete building with walls and ceilings 30 cm thick, or alternatively of damp soil 24 inches (60 cm) thick, would receive a neutron radiation exposure reduced by a factor of 10. Even near ground zero, basement sheltering or buildings with similar radiation shielding characteristics would drastically reduce the radiation dose. Furthermore, the neutron absorption spectrum of air is disputed by some authorities, and depends in part on absorption by hydrogen from water vapor. Thus, absorption might vary exponentially with humidity, making neutron bombs far more deadly in desert climates than in humid ones.

• Illustration — The neutron cross section and absorption probability in barns of the two natural boron isotopes (top curve is for 10 B and bottom curve for 11 B. As neutron energy increases to 14 MeV, the absorption effectiveness, in general, decreases. Thus, for boron-containing armor to be effective, fast neutrons must first be slowed by another element by neutron scattering. The questionable effectiveness of ER weapons against modern tanks is cited as one of the main reasons that these weapons are no longer fielded or stockpiled. With the increase in average tank armor thickness since the first ER weapons were fielded, it was argued in the March 13, 1986, New Scientist magazine that tank armor protection was approaching the level where tank crews would be almost fully protected from radiation effects. Thus, for an ER weapon to incapacitate a modern tank crew through irradiation, the weapon must be detonated at such proximity to the tank that the nuclear explosion's blast would now be equally effective at incapacitating it and its crew. However, although the author did note that effective neutron absorbers and neutron poisons such as boron carbide can be incorporated into conventional armor and strap-on neutron moderating hydrogenous material (substances containing hydrogen atoms), such as explosive reactive armor, increasing the protection factor, the author holds that in practice, combined with neutron scattering, the actual average total tank area protection factor is rarely higher than 15.5 to 35. According to the Federation of American Scientists, the neutron protection factor of a "tank" can be as low as 2, without qualifying whether the statement implies a light tank, medium tank, or main battle tank. A composite high-density concrete, or alternatively, a laminated graded-Z shield, 24 units thick of which 16 units are iron and 8 units are polyethylene containing boron (BPE), and additional mass behind it to attenuate neutron capture gamma rays, is more effective than just 24 units of pure iron or BPE alone, due to the advantages of both iron and BPE in combination. During neutron transport, iron is effective in slowing down/scattering high-energy neutrons in the 14-MeV energy range and attenuating gamma rays, while the hydrogen in polyethylene is effective in slowing down these now slower fast neutrons in the few MeV range, and boron-10 has a high absorption cross section for thermal neutrons and a low production yield of gamma rays when it absorbs a neutron. The Soviet T-72 tank, in response to the neutron bomb threat, is cited as having fitted a boronated polyethylene liner, which has had its neutron shielding properties simulated. • Illustration — The radiation weighting factor for neutrons of various energy has been revised over time and certain agencies have different weighting factors; despite the variation amongst the agencies, from the graph, for a given energy, a fusion neutron (14.1 MeV) although more energetic, is less biologically harmful as rated in sieverts, than a fission-generated thermal neutron or a fusion neutron slowed to that energy, c. 0.8 MeV. However, some tank armor material contains depleted uranium (DU), common in the US's M1A1 Abrams tank, which incorporates steel-encased depleted uranium armor, a substance that will fast fission when it captures a fast, fusion-generated neutron, and thus on fissioning will produce fission neutrons and fission products embedded within the armor, products which emit, among other things, penetrating gamma rays. Although the neutrons emitted by the neutron bomb may not penetrate to the tank crew in lethal quantities, the fast fission of DU within the armor could still ensure a lethal environment for the crew and maintenance personnel by fission neutron and gamma ray exposure, largely depending on the exact thickness and elemental composition of the armor—information usually hard to attain. Despite this, Ducrete—which has an elemental composition similar (but not identical) to the ceramic second-generation heavy metal Chobham armor of the Abrams tank—is an effective radiation shield, to both fission neutrons and gamma rays due to it being a graded-Z material. Uranium, being about twice as dense as lead, is thus nearly twice as effective at shielding gamma ray radiation per unit thickness.

As an anti-ballistic missile weapon, the first fielded ER warhead, the W66, was developed for the Sprint missile system as part of the Safeguard Program to protect United States cities and missile silos from incoming Soviet warheads. A problem faced by Sprint and similar ABMs was that the blast effects of their warheads change greatly as they climb and the atmosphere thins out. At higher altitudes, starting around 60,000 feet and above, the blast effects begin to drop off rapidly as the air density becomes very low. This can be countered by using a larger warhead, but then it becomes too powerful when used at lower altitudes. An ideal system would use a mechanism that was less sensitive to changes in air density. Neutron-based attacks offer one solution to this problem. The burst of neutrons released by an ER weapon can induce fission in the fissile materials of primary in the target warhead. The energy released by these reactions may be enough to melt the warhead, but even at lower fission rates, the "burning up" of some of the fuel in the primary can cause it to fail to explode properly, or "fizzle". Thus, a small ER warhead can be effective across a wide altitude band, using blast effects at lower altitudes and the increasingly long-ranged neutrons as the engagement rises. The use of neutron-based attacks was discussed as early as the 1950s, with the US Atomic Energy Commission mentioning weapons with a "clean, enhanced neutron output" for use as "antimissile defensive warheads." Studying, improving and defending against such attacks was a major area of research during the 1950s and '60s. A particular example of this is the US Polaris A-3 missile, which delivered three warheads travelling on roughly the same trajectory, and thus with a short distance between them. A single ABM could conceivably destroy all three through neutron flux. Developing warheads that were less sensitive to these attacks was also a major area of research in the US and UK during the 1960s. Some sources claim that the neutron flux attack was also the main design goal of the various nuclear-tipped anti-aircraft weapons like the AIM-26 Falcon and CIM-10 Bomarc. One F-102 pilot noted: GAR-11/AIM-26 was primarily a weapon-killer. The bomber(s, if any) was collateral damage. The weapon was proximity-fused to ensure detonation close enough so an intense flood of neutrons would result in an instantaneous nuclear reaction (NOT full-scale) in the enemy weapon's pit; rendering it incapable of functioning as designed... [O]ur first "neutron bombs" were the GAR-11 and MB-1 Genie. It has also been suggested that neutron flux's effects on the warhead electronics are another attack vector for ER warheads in the ABM role. Ionization greater than 50 Gray in silicon chips delivered over seconds to minutes will degrade the function of semiconductors for long periods. However, while such attacks might be useful against guidance systems, which used relatively advanced electronics, in the ABM role, these components have long ago separated from the warheads by the time they come within range of the interceptors. The electronics in the warheads themselves tend to be very simple, and hardening them was one of the many issues studied in the 1960s. Lithium-6 hydride (Li6H) is cited as being used as a countermeasure to reduce the vulnerability and "harden" nuclear warheads from the effects of externally generated neutrons. Radiation hardening of the warhead's electronic components as a countermeasure to high altitude neutron warheads somewhat reduces the range that a neutron warhead could successfully cause an unrecoverable glitch by the transient radiation effects on electronics (TREE) effects. At very high altitudes, at the edge of the atmosphere and above it, another effect comes into play. At lower altitudes, the X-rays generated by the bomb are absorbed by the air and have mean free paths on the order of meters. But as the air thins out, the X-rays can travel further, eventually outpacing the area of effect of the neutrons. In exoatmospheric explosions, this can be on the order of 10 km in radius. In this sort of attack, it is the X-rays promptly delivering energy on the warhead surface that is the active mechanism; the rapid ablation (or "blowoff") of the surface creates shock waves that can break up the warhead.

In November 2012, British Labour peer Lord Gilbert suggested that multiple enhanced radiation reduced blast (ERRB) warheads could be detonated in the mountain region of the Afghanistan-Pakistan border to prevent infiltration. He proposed to warn the inhabitants to evacuate, then irradiate the area, making it unusable and impassable. Used in this manner, the neutron bomb(s), regardless of burst height, would release neutron activated casing materials used in the bomb, and depending on burst height, create radioactive soil activation products. In much the same fashion as the area denial effect resulting from fission product (the substances that make up most fallout) contamination in an area following a conventional surface-burst nuclear explosion, as considered in the Korean War by Douglas MacArthur, it would thus be a form of radiological warfare—with the difference that neutron bombs produce half, or less, of the quantity of fission products relative to the same-yield pure fission bomb. Radiological warfare with neutron bombs that rely on fission primaries would thus still produce fission fallout, albeit a comparatively cleaner and shorter-lasting version of it in the area than if air bursts were used, as little to no fission products would be deposited on the direct immediate area, instead becoming diluted global fallout. • Illustration — The easiest to achieve fusion reaction, of deuterium ("D) with tritium (T") creating helium-4, freeing a neutron, and releasing only 3.5 MeV in the form of kinetic energy as the charged alpha particle that will inherently generate heat (which manifests as blast and thermal effects), while the majority of the energy of the reaction (14.1 MeV) is carried away by the uncharged fast neutron. Devices with a higher proportion of yield derived from this reaction would be more efficient in the stand-off asteroid impact avoidance role, due to the penetrative depth of fast-neutrons and the resulting higher momentum transfer that is produced in this "scabbing" of a much larger mass of material free from the main body, as opposed to the shallower surface penetration and ablation of regolith, that is produced by thermal/soft X-rays. A militarily useful use of a neutron bomb with respect to area denial would be to encase it in a thick shell of material that could be neutron activated, and use a surface burst. In this manner, the neutron bomb would be turned into a salted bomb; for example, zinc-64, produced as a byproduct of depleted zinc oxide enrichment, would when neutron activated become zinc-65, which is a gamma emitter with a half-life of 244 days.

With considerable overlap between the two devices, the prompt radiation effects of a pure fusion weapon would similarly be much higher than that of a pure-fission device: approximately twice the initial radiation output of current standard fission–fusion-based weapons. In common with all neutron bombs that must presently derive a small percentage of trigger energy from fission, in any given yield, a 100% pure fusion bomb would likewise generate a smaller atmospheric blast wave than a pure-fission bomb. The latter fission device has a higher kinetic energy-ratio per unit of reaction energy released, which is most notable in the comparison with the D-T fusion reaction. A larger percentage of the energy from a D-T fusion reaction is inherently put into uncharged neutron generation as opposed to charged particles, such as the alpha particle of the D-T reaction, the primary species, that is most responsible for the coulomb explosion/fireball.

Anti-ballistic missile warheads • W65 — Sprint enhanced radiation warhead developed by Livermore (cancelled) • W66 — Sprint enhanced radiation warhead developed by Los Alamos (1975–1976) Ballistic missile warheads • W63 — Lance enhanced radiation warhead developed by Livermore (cancelled) • W64 — Lance enhanced radiation warhead developed by Los Alamos (cancelled) • W70 Mod 3 — Lance enhanced radiation warhead developed by Livermore (1981–1992). Artillery • W79 Mod 0 — 8 inch enhanced radiation artillery shell developed by Livermore (1976–1992) • W82 Mod 0 — 155 mm enhanced radiation artillery shell developed by Livermore (cancelled)