5 cm Pak 38

• Name — 5 cm Panzerabwehrkanone 38 (L/60) • Origin — Nazi Germany • Type — Panzerabwehrkanone • Is Ranged — yes • Is Artillery — yes • Service — 1940–1945 • Used By — Nazi Germany Italy Finland Hungary Romania Bulgaria First Slovak republic • Wars — World War II Continuation War • Design Date — 1937–1939 • Manufacturer — Rheinmetall-Borsig • Unit Cost — 1,800 man-hours • Production Date — 1940–1943 • Number — 9,566 • Weight — * • w/carriage • Part Length — bore (60 calibres) • Crew — 5 • Cartridge — Fixed QF 50×420mm R 5 cm Pzgr. 5 cm Pzgr. 39 5 cm Pzgr. 40 5 cm Pzgr. 40/1 5 cm Sprgr. 38 • Cartridge Weight — 2.25 kg • Action — Semi-automatic • Rate — 13 rounds/min • Velocity — 550-1,130 m/s (1,804-3,707 ft/s) • Max Range — 3000 yd • Feed — Manual • Sights — Z.F. 3x8° • Breech — Horizontal sliding-wedge • Recoil — Hydro-pneumatic • Carriage — Split-trail • Elevation — -8° to +27° • Traverse — 65°

• Illustration — 5 cm Pak 38 in the Hunnerpark, Nijmegen After the Spanish Civil War, the German authorities started to think that a new anti-tank gun would be needed, even though the 3.7 cm Pak 36 had proven to be very successful. They asked Rheinmetall-Borsig to produce a new and more capable AT-gun. They first designed the Pak 37 in 1935, but the German authorities did not approve it because of its low capabilities. Rheinmetall-Borsig were forced to create a new gun with a longer - L/60 - barrel which was approved for mass production in 1939 under the designation Pak 38.

The original tank gun for the Panzer III was the 5 cm KwK 38, which despite being the same 5 cm caliber had a lower muzzle velocity due to the shorter barrel length (L/42 calibers) and smaller cartridge. When a more powerful gun with greater penetration was needed for the Panzer III the longer barrel 5 cm KwK 39 gun (L/60 calibers) was developed as a variant of the 5 cm Pak 38 towed anti-tank gun.

• Illustration — Pak 38 on the Eastern Front, 1944. The Pak 38 was first used by the German forces during the Second World War in April 1941. When the Germans faced Soviet tanks in 1941 during Operation Barbarossa starting June 1941, the Pak 38 was one of the few guns capable of penetrating the 45 mm sloped armor of the T-34 medium tank at close range. The gun was also equipped with Panzergranate 40 APCR shots with a hard tungsten carbide core, in an attempt to penetrate the armor of the heavier KV-1 tank. Although it was replaced by more powerful weapons, it remained a useful weapon and remained in service with the Wehrmacht until the end of the war. The Pak 38 carriage was also used for the 7.5 cm Pak 97/38 and the 7.5 cm Pak 50 guns. Romania imported 110 Pak 38s in March 1943. The guns remained in service with the Romanian Armed Forces until 1954, when the 57 mm anti-tank gun M1943 (ZiS-2) replaced them.

Calculated armor penetration • Range — Penetration at contact angle 0° • AP • 100 m — 100 mm • 500 m — 79 mm • 1000 m — 60 mm • 1500 m — 45 mm • APC • 100 m — 96 mm • 500 m — 79 mm • 1000 m — 62 mm • 1500 m — 49 mm • APCR • 100 m — 149 mm • 500 m — 108 mm • 1000 m — 72 mm • 1500 m — 48 mm