38 cm Belagerungshaubitze M 16

• Name — 38 cm Belagerungshaubitze M 16 • Origin — Austria-Hungary • Type — Superheavy siege howitzer • Is Artillery — yes • Service — 1916–1918 • Used By — Austria-Hungary Kingdom of Italy Romania • Wars — World War I • Designer — Škoda • Design Date — 1915–1916 • Manufacturer — Škoda • Production Date — 1916–1918 • Number — 10 • Weight — 81,700 kg • Part Length — 6.46 m L/17 • Cartridge — 750 kg • Caliber — 380 mm • Rate — 1 rd per 5 minutes • Velocity — 459 m/s • Max Range — 15,000 m • Breech — horizontal sliding-wedge • Recoil — Hydro-pneumatic • Carriage — firing platform • Elevation — 40° to 75° • Traverse — 360°

Two howitzers were initially ordered and both 'Barbara' and 'Gudrun', as they were nicknamed, were delivered in time to participate in the South Tyrol offensive of May 1916. They were very successful and the Austro-Hungarians ordered another fourteen howitzers and two spare barrels, although only eight of these were delivered before the end of the war. The design was based on a scaled-up Škoda 30.5 cm Mörser M. 16 design, which sped things up considerably. The howitzer was transported in four loads, the barrel, mount and one for each half of the firing, or bedding, platform. Each load was carried by an eight-wheeled electric-powered trailer with the electricity provided by a Daimler Artillerie-Generatorzugwagen (Artillery Generator truck) M. 16, designed by Ferdinand Porsche. The 6-cylinder, 150 hp, 20.32 liter gasoline engine powered two electric generators which fed electric motors in each wheel of the trailer and the rear wheels of the truck. Top speed was 14 kilometers per hour. The solid rubber tires could be removed and the trucks could tow their trailers on the rails. For longer distances they could be towed by ordinary locomotives. After the first two guns were made, the following models were built with several improvements. The carriage which was modified to have two pairs of trunnions, allowing the 24 cm Kanone M. 16 to also be used.

A 52 cubic meter pit had to be excavated to hold the firing platform which took eight to twenty hours, depending on soil conditions. The bedding halves then were winched into position on rails and jacked down into the pit. The carriage was then mounted on the bedding and the barrel mated to it. All this took six to eight hours to prepare for firing. A small tilting crane was mounted on the left side of the turntable to move shells from their transport carts to the loading tray. It was also used to assemble the loading tray and to change the breech. The howitzer could only be loaded at 11° elevation because the shells had to be rammed by a hand-powered winch with pushrod. The eight later weapons used the same carriage as the 24 cm Kanone M. 16; it had trunnion mounts for both types and the gun used the forward mounts while the howitzer used the rear ones. • Illustration — The mount of 'Gudrun' on the rail trailer at the National Military Museum, Romania Eight guns were handed over to the Italians after the Great War. During the Second World War, five of these were used by the Guardia alla Frontiera but none were ever used in combat. The fate of the other weapons is unclear. None were put into service by the Nazis after the Anschluss, possibly because of a lack of ammunition, and it is not certain that Romania actually used their weapon during World War II. Howitzer No. 6 survives in the Heeresgeschichtliches Museum, Vienna, Austria, while 'Gudrun', Howitzer No. 2 is in Bucharest, in the National Military Museum, Romania.

• BL 15 inch Howitzer British equivalent

38 cm Belagerungshaubitze M 16 is classified as a siege artillery or breechloader. Associated with Austria–Hungary.