10-inch M1895 gun

All of the weapons not in the Philippines (except four guns in Canada) were scrapped during World War II. Two of the surviving weapons were relocated from the Philippines to Fort Casey in Washington state in the 1960s.

• Name — 10-inch Gun M1895 • Origin — United States • Type — Coastal artillery • Is Ranged — yes • Is Artillery — yes • Service — 1895–1945 • Used By — United States Army Canada • Wars — World War I, World War II • Designer — Watervliet Arsenal • Design Date — 1888 • Manufacturer — Watervliet Arsenal, Bethlehem Steel, possibly others • Variants — M1888, M1895, M1900 • Weight — 67200 lb (M1888MI and M1888MII) • Length — 30.6 ft • Part Length — 34 calibers 340 in • Cartridge — separate loading, 617 lb AP shot & shell, 510 lb HE • Caliber — 10 in (254 mm) • Max Range — disappearing: 14700 yd • Feed — hand • Breech — Interrupted screw, De Bange type • Carriage — M1893 barbette, M1894, M1896, or M1901 disappearing, most manufactured by Watertown Arsenal • Elevation — disappearing: 12° • Traverse — disappearing: 170° (varied with emplacement)

• Illustration — Practice loading of a 10-inch gun at Fort Hamilton, Brooklyn, NY. • Illustration — A drawing of an M1896 Buffington–Crozier disappearing carriage for 10-inch guns, showing in-battery and loading positions • Illustration — Annotated photograph of an M1901 Buffington–Crozier disappearing carriage for an M1900 12-inch gun, generally similar to 10-inch disappearing carriages • Illustration — 10-inch gun M1888 on barbette carriage M1893, Fort Flagler, Washington state. • Illustration — Surviving M1888 10-inch gun at Fort Cape Spear, St. John's, Newfoundland. • Illustration — Muzzle of 10-inch gun at Fort Casey, Whidbey Island, Washington In 1885, William C. Endicott, President Grover Cleveland's Secretary of War, was tasked with creating the Board of Fortifications to review seacoast defenses. The findings of the board illustrated a grim picture of existing defenses in its 1886 report and recommended a $127 million construction program of breech-loading cannons, mortars, floating batteries, and submarine mines for some 29 locations on the US coastline. Most of the Board's recommendations were implemented. Coast Artillery fortifications built between 1885 and 1905 are often referred to as Endicott Period fortifications. The Watervliet Arsenal designed the gun and built the barrels. A few of the first guns were mounted on low-angle M1893 barbette carriages. Subsequently, most of the guns were mounted on M1894, M1896, or M1901 disappearing carriages; when the gun was fired, it dropped behind a concrete and/or earthen wall for protection from counter-battery fire. Detailed descriptions of the M1888 weapon and Buffington–Crozier disappearing carriage are in the US Army's Artillery circular 1895, pp. 183–195, along with a description and illustration of a "modified Gordon" disappearing carriage, an experimental type. Detailed parts lists for the M1888M1 weapon and supporting equipment are in the Ordnance supply manual by George L. Lohrer, United States Army, Ordnance Dept, 1904, pp. 47–113. After the Spanish–American War, the government wanted to protect American seaports in the event of war, and to protect newly gained territory, such as the Philippines and Cuba, from enemy attack. A new Board of Fortifications, under President Theodore Roosevelt's Secretary of War William Taft, was convened in 1905. Taft recommended technical changes, such as more searchlights, electrification, and in some cases fewer guns in particular fortifications. The seacoast forts were funded under the Spooner Act of 1902 and construction began within a few years and lasted into the 1920s. The defenses of the Philippines on islands in Manila Bay and Subic Bay were built under this program.

A 10-inch "depressing gun" M1896 on an M1894 disappearing carriage was mounted in an experimental battery at Fort Monroe, Virginia in the northeast bastion. The battery was operated from 1900 to 1908, and the concrete portions remain in place.

After the American entry into World War I, the Army recognized the need for large-caliber railway guns for use on the Western Front. Among the weapons available for this were 129 10-inch guns, to be removed from fixed defenses or taken from spares. Thirty-six Schneider-type sliding-mount railway carriages for 10-inch guns were contracted to be manufactured by the Marion Steam Shovel company and delivered to France for finishing by March 1919. Of these, eight sets were shipped prior to the Armistice, then were returned to the US where 22 of the 36 originally contracted mountings were completed. A detailed description of the railway mounting is given in Railway Artillery, Vol. I by Lt. Col. H. W. Miller, USA. The range of the railway weapon was 24,700 yds at 36° elevation. Guns not mounted were returned to coastal defenses after the war; in the late 1920s the 10-inch railway gun was declared obsolete and the mountings scrapped.

In April–May 1941 eight M1888 guns were sent to Canada under Lend-Lease for use in coast defenses there. These included three guns from Battery Harker, Fort Mott on disappearing carriages, three guns from Battery Quarles, Fort Worden on barbette carriages, and two guns from Battery Revere, Fort Flagler on barbette carriages. Two of the Fort Mott disappearing guns were deployed at Fort Cape Spear, St. John's, Newfoundland and remain there. The remaining disappearing gun from Fort Mott and one barbette gun from Fort Flagler were deployed at Fort Prével on the Gaspé Peninsula in Quebec. Two of the barbette guns from Fort Worden were deployed to Fort McNutt on McNutts Island, Nova Scotia and remain there, although only part of one still exists. The remaining two barbette guns from Forts Flagler and Worden were deployed at Wiseman's Cove, Botwood, Newfoundland and no longer exist. Along with other coast artillery weapons, some of the 10-inch guns in the Philippines saw action in the Japanese invasion in World War II. Since they were positioned against a naval attack, they were poorly sited to engage the Japanese, and the open mountings were vulnerable to air and high-angle artillery attack. In 1940–44, 16-inch gun batteries were constructed at most harbor defenses, and essentially all 10-inch guns not in the Philippines were scrapped 1943–44.

Nine 10-inch guns (one partial) remain at four locations. 1. Two 10-inch Guns M1895MI (#25 & #22 Watervliet) on Disappearing Carriages M1901 (#14 & #16 Watertown), Battery Grubbs, Fort Mills, Corregidor Island, Philippines. The guns lie behind their mountings, since they were fired while disconnected from the carriages to deny use of them to the Japanese forces. 2. One 10-inch Gun M1895MI (#20 Watervliet) (spare gun), Battery Grubbs, Fort Mills, Corregidor Island, Philippines 3. Two 10-inch Guns M1895MI (#26 & #28 Watervliet) on Disappearing Carriages M1901 (#13 & #15 Watertown), Battery Worth, Fort Casey, Coupeville, WA (guns moved in the 1960s from Battery Warwick, Fort Wint, Grande Island, Subic Bay, Philippines) 4. Two 10-inch Guns M1888 (#41 & #3 Watervliet), Fort Cape Spear, St. John's, Newfoundland, Canada (guns moved in World War II from Battery Harker, Fort Mott, New Jersey) 5. One 10-inch Gun M1888 (#12 Watervliet) on Barbette Carriage M1893 (#11 Watertown) (with partial remains of other gun (#37) and carriage (#1)), Fort McNutt, McNutts Island, Nova Scotia, Canada (guns moved in World War II from Battery Quarles, Fort Worden, WA)

• 10"/40 caliber gun Mark 3 - contemporary US Navy weapon • BL 9.2-inch Mk IX – X naval gun - contemporary British naval and coast defense weapon • Canon de 240 L Mle 1884 - contemporary French coast defense, siege, and railway weapon

The canonical record carries the following identifying particulars. The record continues: 10-inch M1895 gun is classified as a rifled breech loader or coastal artillery weapon. It is also recorded that 10-inch M1895 gun is associated with United States.